The Barlow door is a more traditional design of door and will compliment the more traditional built house, with a outer solid frame housing horizontally tongue and grooved boards which are glue bonded to the rear solid cross rails of the door, all doors are supplied basecoat treated as standard
SIZES
Available in made to measure sizes from 6ft to 18ft wide and 6ft to 10ft high
GEAR OPTIONS
Trackless canopy gear is available on doors up 8ft wide Retractable operating door gear is our standard option with standard Tee handle locking, Euro locking is optional, see gear description on the information page
FULLY FINISHING (optional)
To complement your new door we would advise that you go for the option to have your door factory fully finished with our Sikkens 955 power-feed finishing system with a choice of 9 standard colours, which will give the door a hard satin long lasting finish that could last up to 7-10 years before recoating
DOOR SPECIFICATION & WARRANTY:
TRADTIONAL All the traditional Up & Over, Side hinged and Sectional range of doors are manufactured from the finest grade of Kiln Dried Western Red Cedar selected and crafted using traditional door construction methods and joints, ie mortice and tenon, glued and wedged on all structural timbers to give strength and a long lasting service, proven over many years of door manufacturing. All top, middle and bottom rails are solid Cedar, fininshed to a thickness with nominal width sizes to suit the size of door, on doors over 8'0 x 7'0 may have lateral and vertical timber or steel bracings (with the exception of side hinged doors) to give strength and stability to the door also to minimise bowing and deflection to the door when in an over-head position.
SHERWOOD Sherwood range of timber doors are manufactured using selected kiln dried 16mm Cedar facings glue bonded on to 6mm exterior plywood backing sheets of nominal widths to suit door size and style. They are then ounted into a pre-finished Aluminium boundary frame with steel lateral bracings to reinforce the strength of the panel.
GLAZING Glazing in all doors is of 4mm safety glass in plain, stippled or flemish pattern with either
plain, diamond or square leaded design.
PROTECTION All timber door panels are fully dipped in tank of Sikkens light oak dip-coat stain which gives a mild seal coating and could last up to 6 weeks after installation. We recommend that the door is top coated immediatley after installation to the external and internal surfaces with a Sikkens top coat system to the stain manufacturers instructions.
STORAGE All doors are delivered with a polythene shrink wrap protection which should be left on until the top coats are applied, taking care not to puncture the external face. Prior to fitting, doors must not be stored in direct sunlight or be exsposed to splashes or rain as colour fading and / or staining may result (this dos not apply to factory finished doors). Doors must always be stored in an upright position and not in a damp or un-natural enviroment.
Please note Cedar is a beautiful material with natural colour and grain variations whilst this will aways be a feature of timber doors we do try to harmonise the effect by hand matching all component parts.
LIABILITY and WARRANTY Cedar doors and gear are guaranted for a period of 2 years for unfinished doors and
4 years for factory fully finished doors. This guarantee does not cover any damage or defects arising through incorrect storage, handling or installation, it also excludes normal wear and tear items ie: cones, cables, rollers, lock cylinders or springs. Cedar Door accepts no liability for the natural variations in colour, warping, splitting, swelling or shrinkage due to ordinary natural processes of ageing, fading or the effects of weather or climate or shirkage, warping or swelling which could have been prevented by carrying out finishing and maintenance recommended by the company.
QUALITY CHECK
Visual appearance and quality check should be carried out in natural daylight and not direct sunlight. Stand at a distance of 3 meters from the door to view the overall appearance. The door is acceptable if, taking into account the facts below, none of the following are readily visible on the face of the door. * Marks or distortion associated with the manufacturing process * Minor indentations, marks or scuffs on the suface * Paint or stain blemishes
CEDAR CD 100 RETRACTABLE DOOR GEAR
CD100 Gear has the advantage of maximum clearance on frame opening width at average door mirror height ie drive through width, and the lower weather strip is of soft rubber therefore avoiding any damage up to frame opening width. With a multi spring unit at high level with finger safe springs, with a choice of two types of locking handles, available on most doors up 2438mm ( 8ft ) wide or 45kg (100Ib) CD 150 / 200 / 250 These gears are based on the traditonal retractable gearing available on garage doors. Our latest design has a number of benefits, all parts are rust protected with either galvanised or zinc plating for lasting looks, all bearing sufaces are made of nylon for very low maintenance, long lasting reliability and smooth running, even our springs are galvanised. All doors fitted with the above operating gear is supplied with the top roller brackets and weather strips pre-fitted to the door for ease of installation.
CEDAR CANOPY OPERATING GEAR Doors specified with canopy operating gear come complete with the gear prefitted to the door for quick and easy installation. The latest canopy gear is very robust and has a number of benefits, a well balanced over-head torsion spring with 3mm cone and cables including an antidrop system to prevent door droping in the event of a cable or spring break, a strong 'U'steel section joins the door arm to the roller and spindle giving the whole door a rigid feel. Our rollers are of a large diameter for smoother running and improved location. Security has been well thought out with 3 point locking and 2 roller security brackets meaning that a closed and locked door has 5 effective fixed positions. standard retractable gear CD150,200,250 CD 100 door gear ( on doors up to 8'0 x 7'0) Comparison Chart , showing clear opening widths CD100 & CD 150-250 Note: The chart below is based on a 7'0 x 7'0 ( 2134 x 2134 ) door, the thickness of the door will also reduce the opening height ie; door up to 8ft (2438) wide = 80mm, 10ft ( 3040) 120mm 16ft (4870) 155mm on all solid timber doors, 85 mm on all Sherwood doors.
We deliver most doors on our own transport, average delivery time on a timber door is 4-6 weeks. Due to that fact theses doors are not stocked items at the factory, All timber door are hand made at the point of ordering to your Specification.
Delivery hours - 6.30 AM -6.30PM. You must have someone available between these times to assist with unloading. We will telephone with the approximate time about 3 days before delivery. Our driver will then telephone you about 1/2 hr before arrival.
For further details on delivery, including latest updates on manufacturer times, please visit our delivery page by clicking the tab at the top of the page.
